REVERSE Angled One Humbucker Strat Guard
One Hum (1H) Pickguard w/ Reverse Angle Humbucker Rout in Bridge Position
Choice of Colors & Control Styles

~~ITEM DESCRIPTION~~
This REVERSE ANGLED Humbucker pickguard is cut for one reverse angled humbucker at the bridge and your choice of pot hole placement. Be sure your body routing will accept the pickup placement associated with this guard style. Many bodies will require additional routing or modding for this type of guard.

This guard is cut for one humbucker reverse angled at the bridge and features a shielded electronics area with an 11-hole mounting pattern to fit U.S. Fender standards and MEX 2002 & newer standards. It will not fit other guitars or work with specialty sized pickups. Please contact us prior to purchase if you have any questions regarding fit.

This guard is pre-configured with typical standard features for this style with limited customization options. We offer semi-custom and fully custom Strat guards in a wide variety of styles with an extensive number of custom options to create your own unique design or customize a pickguard for your needs. Check the bottom of this product page for links to related guards featuring additional modification possibilities or contact us if you have any questions. Consider adding new Dragonfire pickups along with a wiring harness to your custom guard purchase and we’ll wire a totally custom new prewired/loaded guard for you!

~~PRODUCT HIGHLIGHTS~~
*Fender® Replacement Pickguard
*Protective Film Surface Cover (remove carefully after install)
*Aluminum Shielded Electronics Area (shape & color may vary)
*Fender Standard USA & MEX/MIM 2002 & Newer Style Fit
*Beveled Guard Edging

YOUR CHOICE – Overall Style of Guard
*Your choice of right or left-handed / lefty guard style.

YOUR CHOICE – Guard Color/Style
*Follow this link to see our guard colors in more detail.
*Standard guards are cut from multi-ply traditional pickguard materials (some exceptions). Unless specified, material layers may vary (impacts side edging color only).
*Standard solid guards cut from single-ply traditional pickguard materials do not have the customary side stripe.
*Other styles are specialized single-ply solid non-standard custom material without a side stripe. Some options in this color category feature a range of translucent, shimmer, sparkle, or reflective qualities. Contact us for details if these features are important to your project as the gradient varies. Many of these materials are designed to vary in pattern, color, and style, providing unique outcomes for each project – expect variability.
*Most guard styles come with full-size pre-applied electronics shielding sheet. Some specialty guards, including translucent or transparent styles, may have single or double-sided protective covering with electronics shielding sheet included separately so you can choose whether/how to apply it.
*Allow and expect color and pattern variation due to photo and monitor settings, natural product variance, and personal perception. If you are looking for a particular outcome or project color match, carefully consider your purchase as many of our material options are designed to provide unique project finishes and we cannot guarantee a specific look.

YOUR CHOICE – Mounting Style
*For your guard mounting style, choose the option that will work best for your needs.
--None (Undrilled): No mounting screw holes (undrilled, do-it-yourself) so you can place the mounting holes just where you need them if you’re not sure what pattern you have or if you have something more unusual. This is the style we recommend if you have a Squier you're modding as the guard mounting is the most common fit issue.
--11-Hole Standard

YOUR CHOICE – Bridge / Trem Cut
Choose from standard or Floyd Rose bridge / trem cut styles.
*Floyd Rose Cut pickguards are designed for a Floyd Rose Tremolo rather than a Standard Strat Trem set-up. Guard mounting screw spacing will be adjusted appropriately for this choice as needed. Note that bridge pickup rout placement may also be adjusted (moved forward) accordingly if this option is selected in conjunction with a humbucker rout at the bridge.

YOUR CHOICE – Pot Hole Positions
*We can send these custom guards without any holes (undrilled so you can drill how and where you like) or with pot or mini switch holes drilled in the position of your choice. Please check out the provided reference image for general hole placement options. If you do not want any holes drilled, simply select “NONE” on every Position Option.
--P1 – Position #1 – Standard Strat Volume Hole
--P1.5 – Position #1.5 – Slight Offset between P1 and P2
--P2 – Position #2 – Standard Strat Middle Tone
--P2.5 – Position #2.5 – Slight Offset between P2 & P3
--P3 – Position #3 – Standard Strat Bottom Tone
--P4 – Position #4 – Offset
*IMPORTANT NOTES
--Position #4 may not fit in all Strat routs and additional routing may be required with this selection.
--Control Pot holes are compatible with full-size or mini-pots.
--Be sure to check your control option selections and compatibility with hole selections/placement.
--Positions # 1.5 & 4 are not recommended to be selected for the same build unless using mini pots as there would not be enough space for standard control pot placement.
--We will drill as you select. Some hole placements will not be compatible with certain routing or may be too closely positioned for standard knob sizes. It is solely your responsibility to determine and select your desired hole placements. Ask questions prior to purchase as needed.

OPTIONAL ADD-ON – Matching Trem Cover
*Select this option if you would like a matching trem cover (cut from the same material sheet). This will provide you with the closest possible match to your new guard. Trem covers purchased separately may or may not match as well. Please note that some of our specialty style materials are designed to vary in color, pattern or style in order to provide unique outcomes so covers and guards cut from the same material sheet may naturally differ in appearance.
*Your choice of either no mounting holes (undrilled, do-it-yourself), 6 standard or 6 lefty mounting holes.
*Select no string slot (uncut, do-it-yourself), standard or lefty string slot placement.
*Add on trem covers feature beveled edging.

OPTIONAL ADD-ON – Pickguard Mounting Screws
*Select this option to include guard mounting screws.

~~PURCHASE NOTES~~
These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems and may not work with some pickup covers/styles. Guards will not fit “Squier” “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Reference images are approximations and not to scale; variability is to be expected. Images provided are representations only. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications.

Check measurements before purchase. Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. DO NOT PURCHASE if you are unsure of your requirements, needs or ability to make any required adjustments for your newly custom designed guard.

Since we process orders as quickly as possible and each guard will be cut just for you, be sure of what you want and ask any questions before completing your purchase.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

Allow and expect variation in color due to photo and monitor settings as well as natural product variance.

Ask any questions regarding colors, materials, options, measurements, installation, requirements, special requests, etc. prior to purchase.

Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. Take your time for installation; do not use power tools and do not over-tighten screws or other components. If you elect to drill or cut your own controls or holes, please be aware that some guards are extremely difficult to drill yourself if you do not have experience or proper tools. This is especially true for mirror, clear, sparkle and specialty color/style materials.

Any use, modification or damage to a guard invalidates your ability to make a return.