Control Pot, Large, Extra Long Brass Shaft
Click To Enlarge

Standard Control Pot, Large/Quarter Size
Extra Long Brass Shaft
Split Shaft XLBS Pot for Gibson Les Pauls
Choice of Audio “A” 500K Pot (A500K) or Linear “B” 25K (B25K) Pot Style

ITEM DESCRIPTION
For an easy mod that produces noticeable results, this split-shaft LP control pot is a great option. Most players will be able to gain a more precise response to manipulation with these pots. These will work with most coarse knurled, 18-spline style knobs.

This is a large, extra-long, split-shaft control pot and mounts through the body and ground plate of most LPs. The included hex mounting nuts give you the ability to adjust your height. Of course, your set-up may be different and you may require additional nuts or lock washers (not included). Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

Your choice of OHM style: 25K or 500K. A control pot is a variable resistor controlling the signal strength. “K” is the reference to the resistance rating of the pot (kOhms). Higher pot 500K values typically lend a brightness to your sound while the 250K lower value pots typically result in a bit more playing warmth. Many players prefer pairing humbuckers with 500K pots and single coils pickups with 250K pots. You might switch it up depending on your style and what you are looking for in terms of performance. 25K pots are only used with active pickups.

Your choice of pot style ~ Audio (aka “A” pot or “Aud” pot) or Linear Taper (aka “B” pot or “Lin” pot). Both types of pots will be at ~0% in the min position and ~100% in the max position. Some players believe audio pots provide a smoother volume roll or transition, while others like the linear pots better for tone transitioning. It’s really a personal playing preference as performance will vary based on many factors, including style, equipment and skill.

Be sure to check your measurements carefully to see if this item will work for your set-up.

PRODUCT HIGHLIGHTS
*Quarter Size
*3 Soldering Tabs/Lugs
*Extra Long Shaft Style Body/Plate Mount
*Split Shaft 18 Spline Style
*Brass Bushing
*Smooth Operation ~ Gradual Gain/Loss
*Tolerance: +/- 10%

APPROXIMATE MEASUREMENTS
*Shaft Length: 30mm
*Pot Diameter: 24mm
*Overall Pot Height: 41mm
*Threaded Bushing Height: 21mm
*Required Hole Diameter: 10mm
*Mounting Nut Diameter: 10mm (inner) & 13mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 10mm (inner) & 17mm (outer)
*Cavity Depth Required: 28mm
Measurements provided are approximations; variability is to be expected. Ask any questions prior to purchase.

WHAT’S INCLUDED (What You Get)
*1 Control Pot
*1 Standard Flat Washer
*2 Hex Mounting Nuts
Nothing else is included. Additional images may be provided for reference and comparison purposes only.

PURCHASE NOTES
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. Instructions for installation are NOT INCLUDED or provided.
Inspect your order upon receipt; we pledge to address any issues PRIOR to installation.

  • Item #: 12044

LP Control Pot ~ LARGE, Extra Long Brass Shaft XLBS for Les Paul

Price: $10.95
4 or more: $10.50 each
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review