Active Circuit Onboard Effects, Chorus Sound Driver / Controller
Click To Enlarge

Active Circuit Onboard Effects, Chorus
Chorus Sound Driver ~ Level and Rate Adjustment Style
Active Chorus Controller Onboard Effect
Brand New Expansion Unit for Guitar or Bass

The Chorus sound driver is an active on-board Chorus unit designed to give you the thick, full support of back-up guitar. It’s no surprise that this effect is so prevalent in so many genres and now you have the chance to add this effect that can help bring color, life and depth to your play.

This on board effect active circuit control for passive or active pickups replaces one of your existing tone pots using a large, long-shaft, body mount control pot. This pot style allows you to bypass the unit in the off position and features a split shaft that will work with most coarse knurled, 18-spline style knobs.

Prior to finalizing installation, utilize the adjustable trim pot on the bottom of the control board for personalization of your chorus rate usage – this gives you control of the amount of chorus effect so you can dial in your shimmer effect and warble sound just the way you want it. This is an ideal configuration if you are confident in your settings and rate desired for your slow-to-fast settings. The control pot can then be used after install to adjust your overall saturation and effect levels.

Check out our Chorus Deluxe if you’d like the option to control the level and rate of chorus via two control pots. This allows for total adjustment capability without having to remove your guard to adjust the level on the back of the standard Chorus control board.

An included basic, value-line stereo style jack is wired to break your circuit, disconnecting your battery signal thus helping reduce drainage and improve battery life. You can use this unit by itself or with other effects on the same battery. Be sure to check out this product’s details and dimensions prior to purchase to check for compatibility with your set-up.

If you are going through a guard, you may need additional nuts or lock washers. If needed, simply use the drop-down selection box to add extra nuts and washers. Of course, your set-up may be different. Be sure to check your requirements in relation to the measurements provided for this item. Ask any fit or compatibility questions prior to purchase.

*Trim Pot Control
*Built-In Chorus Rate Control
*Clean Bypass
*Rate Adjustable Set Feature
*Simulates Chorus Effect
*Split Shaft for Compression Fit Knob (Non-Threaded)
*Basic Value Stereo Jack Included
*Requires 9V Battery Power (Not Included)
*Mounting Hardware Included

*Overall Pot Height: 40mm (top of shaft to bottom of board)
*Circuit Board Dimensions: 28mm x 28mm
*Pot Shaft Length: 20mm
*Threaded Bushing Height: 11mm
*Required Hole Diameter: 8mm
*Mounting Nut Diameter: 8mm (inner) & 11mm (outer)
*Mounting Nut Depth: 2mm
*Washer Diameter: 8mm (inner) & 12mm (outer)
*Cavity Depth Required: 24mm
*Battery Lead Wire Length: 150mm
*Jack Accepts Most ¼” Standard Plugs
Measurements provided are approximations; variability is to be expected.

*1 Chorus Unit

Please check your instrument and set-up needs carefully to see if this item will work for you.
Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.
ASK ANY QUESTIONS PRIOR TO PURCHASE. We accept returns of unused items; buyers are responsible for return shipping. We are here to help with any questions prior to purchase to avoid the need for a return.
INSTRUCTIONS FOR INSTALLATION ARE NOT INCLUDED. Due to the vast and varied nature of possible set-ups, we do not provide specific information or diagrams for installation. Installation requires soldering. Depending on your current or desired set-up, installation may require extra care, accuracy, or advanced skill. You should be able to use knowledge of wiring and/or your own diagram/instructions/experience to install. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage. We do not provide technical or any other type of support for installation, configuration, modification, or use of this item. Do not purchase if you are unsure of your ability to successfully complete installation.
ALLOW & EXPECT variation in color due to photo and monitor settings as well as natural product variance. Color, sound, performance or other descriptions are subjective as well as generic in nature. YOUR OUTCOME WILL VARY based on many factors, most importantly your own skill, style, and experience. Due to the production/machining process, some natural variation and imperfection may be expected in the finish of this item.
CONTACT US PRIOR TO PURCHASE if you have any questions or concerns regarding color, pattern, fit, materials, installation requirements, compatibility with your instrument, measurements provided, or anything else.
INSPECT YOUR ORDER CAREFULLY UPON RECEIPT for any shipping damage, fit, and general appearance. DO NOT use, modify or install the product if anything does not meet with your approval for any reason. Message us right away; we pledge to address any problems or concerns you have PRIOR to installation. If everything is in order upon receipt, install carefully to enjoy.

  • Features: Chorus Rate & Level Adjustment
  • Style: Onboard Effect, Active Chorus Controller
  • Item #: 35024

Active Circuit Onboard Effects, Chorus Sound Driver / Controller

Price: $44.95
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review